Skip to main content
Roviral

RECOM Adds Two 720W IP67 Supplies for Decentralised Industrial Power

RECOM’s new 720W RACPRO1 supplies bring conversion closer to industrial loads; one model adds four isolated, individually protected outputs.

RECOM Adds Two 720W IP67 Supplies for Decentralised Industrial Power

Moving power conversion out of the control cabinet can shorten the path between a supply and its loads, and gives machine builders more options for placing equipment. RECOM has added two 720W models to its RACPRO1 family for this kind of decentralised industrial installation: the RACPRO1-DP-T720 and RACPRO1-DP-T720-4SP. Both carry an IP67 rating and are designed for use outside control cabinets.

Saba Aafreen
Two 720W IP67 power supply series join RECOM’s RACPRO1 family
RECOM has added two 720W IP67 series to the RACPRO1 family.

Conversion at the point of use

Industrial power supplies are often mounted in a central cabinet, with wiring then routed from that location to equipment around a machine or facility. A decentralised arrangement places conversion nearer to the loads. RECOM says this can reduce wiring and installation cost while giving machine builders more flexibility in equipment layout.

The practical appeal depends on the installation. Bringing a supply closer to its loads can simplify some cable runs, but the supply’s position, input wiring and load connections still need to fit the machine’s electrical and mechanical design. The IP67 rating identifies both new series for installations where that enclosure rating is required; it doesn’t, by itself, describe every environmental or mounting condition. The source gives no dimensions or further environmental limits.

The two models address different distribution needs. The RACPRO1-DP-T720 is the 720W supply, while the RACPRO1-DP-T720-4SP adds a four-channel electronic fuse (e-Fuse) with four isolated outputs. That second option combines power conversion with per-output protection, which may suit systems where several loads need separate current limits from one supply.

Input range, efficiency and overload capability

RECOM specifies three-phase AC input from 320VAC to 600VAC, or DC input from 425VDC to 800VDC, for the first series. The supply reaches up to 96.8 percent efficiency and can provide its full output power through +45°C using convection cooling, according to the product details. That cooling method avoids a fan, while the stated temperature and power capability give designers concrete conditions to consider when placing the unit.

Saba Aafreen

For short-term overload situations, the supply can deliver up to 1080W for 5 seconds. This is a time-limited overload figure, distinct from its 720W output rating; it shouldn’t be treated as a continuous operating point. Designers evaluating a load profile will need to compare the duration and magnitude of expected peaks with that stated limit.

RECOM also lists a power density of 400W/L. That figure points to a compact power-conversion package, although the source doesn’t provide physical dimensions, so it can’t establish how much installation space a particular build will require. Layout, cable access and the surrounding equipment will still shape the usable footprint.

Four isolated outputs with electronic protection

The RACPRO1-DP-T720-4SP is distinguished by four isolated outputs, each with an adjustable current limit through its built-in e-Fuse. This lets a designer set protection separately for multiple connected loads. If one branch encounters an overload, per-channel protection can help keep the response focused on that output instead of treating all connected loads as a single undifferentiated group.

The model also offers safe start-up for capacitive loads, selectable hiccup or trip modes, and priority disconnect during overload. These are configuration and response features that affect how the supply behaves as loads start or when demand exceeds available capacity. The source doesn’t state the current-limit adjustment range or explain the priority scheme, so those details will need to be checked against the product documentation when selecting the unit.

That distinction between the two series matters in system design. A machine needing one 720W supply may be served by the RACPRO1-DP-T720; an arrangement with several loads and a need for separate current limits may benefit from the four-output version. In either case, the input range, available output power and installation conditions have to match the application.

Applications and design checks

RECOM identifies factory and process automation, machine building, intralogistics, battery energy storage, water treatment, HVAC and agriculture as potential application areas. These span installations with differing load patterns and equipment layouts, so the relevant model will depend on how power is distributed and what protection each branch requires.

Michael Peters, Product Manager at RECOM, describes the two series as serving different industrial requirements: the T720 focuses on power supply performance, while the T720-4SP combines conversion with an integrated e-Fuse. That framing aligns with the main engineering choice: a simpler supply path or a single unit that also provides four isolated, current-limited outputs.

For engineers considering a move away from cabinet-centred distribution, the specifications provide a starting point: 720W output, broad three-phase AC and DC input ranges, up to 96.8 percent efficiency, convection operation at full power through +45°C, and a 5-second overload rating of up to 1080W. The four-output model adds branch-level protection features. Final selection still depends on the detailed electrical ratings and installation requirements for the specific machine.

Source: Saba Aafreen · www.electronicsforu.com

Filed alongside