Skip to main content
Roviral

ChipNexus NEX Analogue Agent Connects AI Design Tasks to Virtuoso, Spectre and Calibre

ChipNexus says its NEX Analogue Agent can coordinate schematic, simulation, layout and verification work through existing EDA tools and PDKs.

ChipNexus NEX Analogue Agent Connects AI Design Tasks to Virtuoso, Spectre and Calibre

ChipNexus’s NEX Analogue Agent puts an AI coordinator across several stages of analogue and mixed-signal chip design, using the company’s existing design tools for the work. Announced as available on November 17, 2026, the agent is part of the NEX multi-agent engineering platform and works with Cadence Virtuoso, Spectre simulation and Siemens Calibre physical verification.

Nidhi Agarwal
Representation of analogue chip design

The practical point is its connection to an established EDA environment. ChipNexus says NEX uses customers’ installed EDA licences and process design kits (PDKs). That means the agent is intended to operate within the tool and process setup already used by a design team, rather than replacing those tools with a separate design flow. The announcement does not specify supported tool versions, process nodes, or the range of PDK configurations it can handle.

One workflow across design stages

Analogue design work moves between schematic creation, simulation, physical layout and verification. NEX is designed to coordinate these stages as one workflow: it can set up a project, create schematics, produce layouts, run simulations, check results and prepare reports. The Analogue Agent assigns work to specialised Virtuoso sub-agents, with each sub-agent using tools and working against defined acceptance criteria.

That division matters because a design task is more than a request to produce a schematic. A circuit must be represented in a form the simulator can evaluate, and its physical implementation must then satisfy layout checks while remaining consistent with the schematic. Bringing these tasks under one coordinator could reduce the manual handoffs between tool steps. The company’s description, however, does not quantify time savings or explain how much engineering review each stage requires.

Nidhi Agarwal

Engineers can use the NEX platform to open and edit schematics and layouts in Virtuoso. The agent can export netlists, run Spectre simulations and analyse the results. For physical checks, it can run design rule checks (DRC) and layout-versus-schematic (LVS) verification using Calibre. It can also export GDS layout data and compare layouts against reference designs.

Tool evidence remains central

These capabilities place the agent inside familiar engineering checkpoints. A netlist provides the circuit description used for simulation; Spectre evaluates the circuit’s behaviour under the conditions set for a run. DRC checks layout against applicable design rules, while LVS checks whether the physical layout corresponds to the intended schematic. GDS export produces layout data for downstream use. NEX’s stated role is to coordinate these operations and report results tied to the tools that perform them.

ChipNexus CEO Dan Elmhurst said the agent “reports every result against the tool’s own evidence.” He also said it runs on the Virtuoso, Spectre and Calibre flows customers already use, and described it as available to teams. That emphasis on traceable results addresses a central concern in AI-assisted design: engineers need to inspect what was run and what evidence supports a reported pass or failure. The announcement does not describe the report format, the level of detail exposed, or how the system handles ambiguous or failed results.

There is a useful distinction between automating a sequence of tool operations and making the design decisions that determine circuit performance. ChipNexus describes project setup, schematic and layout work, simulation, checking and reporting as agent-supported tasks. It does not provide benchmark results, design examples, or evidence that the agent independently resolves trade-offs in analogue circuit design. Engineers evaluating it will therefore need to establish how its acceptance criteria map to their own requirements and how proposed edits are reviewed.

What teams will need to evaluate

Compatibility with installed licences and PDKs may ease adoption for teams already working in the named tools, but it does not by itself establish compatibility with every installation. Tool versions, process-specific setup, access permissions and the way existing design data is organised can affect how an automated workflow fits into a project. ChipNexus has not detailed those requirements in the announcement.

For design groups, the useful test is whether NEX can carry a representative task through schematic editing, simulation and physical verification while leaving a clear record of each operation and result. The platform’s multi-agent structure and its use of Virtuoso, Spectre and Calibre provide the proposed workflow; the quality of its output will depend on the design constraints, tool configuration and acceptance criteria supplied to it. The agent is available now, so its value will become clearer through evaluation on real team workflows and existing PDK setups.

Source: Nidhi Agarwal · www.electronicsforu.com

Filed alongside